• Lower CAPEX and OPEX costs
  • Does not create polution
  • Does not waste precious resources such as water
  • Does not waste precious resources such as water
  • Recycles for reuse
  • Non-caustic and not affected by salinity
  • Oil or fuel from spills is salvaged
  • Cleans soil, sand and water to low ppm ready for reclamation
  • Stops emulssions

Applications for LC ℠

  • Recovers hydrocarbons/oil from down hole and additional oil from end of life wells
  • Recovers oil from oil sands and cleans sands to ppm
  • Recovers, cleans and salvages oil from oil spills on water and land
    • Contaminated medium is cleaned to ppm ready for immediate reclamation.
  • Shingle recycling
    • Recovers bitumen from Shingles and cleans each component to ppm to be re-used instead of filling or polluting landfills
  • Cleans tanks and sludge, salvaging the oil.
  • Cleans pipelines or can be used to move oil in the pipeline
  • Cleans tailing ponds and production water to ppm and salvages the oil.
  • Cleans drill cuttings and salvages the oil.
  • Cleans water contaminated with fuels
  • Wax issues

Down Hole

LC℠ Injection


Comparison of LC℠ to Conventional Solvents

Report done by UNIVERSITY OF REGINA in Canada

LC℠ recovers more bitumen than conventional solvents And is recaptured for re-use with no pollution




Based on the results obtained and according to OECD 423, it is concluded that given test item LD50 Mice test for liquid catalyst-LC, supplied by Global Advanced Technologies LLC, was falls under ‘Category 5 or unclassified’ according to the Globally Harmonized System (GHS) for the classification of chemicals. The acute oral cut-off LD50 value of LD50 Mice test for liquid catalyst-LC in swiss albino mice is greater than 5000 mg/Kg.




“Essentially nothing or not detect (ND) was found in the cut fractions for gasoline, jet and diesel. The remaining found recoveries for Vac Gas Oil 42.3 ppm (650-1000 F) or carbon number 20-44 and the found recovery of the residue 1000F+ (Carbon number C44+) was 20.5ppm. These values are very low and can arise from naturally occurring organic materials in soil such as humic acids, etc. (Clean as beach sand)”


Demo on Oil Sands similar to Clean up of Oil Spills


Down Hole Application

Global Advanced Technologies

LC ℠on Shingles

Global Advanced Technologies

LC℠ on Oil Spills on water and emulsions

Additional test results

Additional test results

Somoil - LC℠ removed hydrocarbon to almost non detect., far greater than standard process

Global Advanced Technologies
Angola Terminal Pollution, GAT-Angola in negotiations to clean.

Angola Terminal Pollution, GAT-Angola in negotiations to clean.

Testing for potential projects in Taiwan and China

Lab of Chengdu Baicui Environmental Technologies, LTD
Table 1. Test results in Taiwan
In Taiwan. (December 7th – December 13th)

Test nine (9) samples
Six (6) industrial waste water samples;
(1) Emulsified water
(2) Glycol based cutting fluids
(3) Anti-rust liquid
(4) Aqua-quench liquid
(5) Liquid with solvent
(6) Electroplating liquid
Two (2) oil contaminated soil samples
(1) Petroleum hydrocarbon contaminated soils (Diesel and fuel oil).
(2) Sands used to adsorb and polish marine diesel.
One (1) oil tank bottom sample.
Water samples:
LC does great job to remove oil out of liquid.
Especially at samples (1), (3), and (4).
Soil samples:
LC does great jobs for both samples.
Tank bottom sludge:
LC does a great job.
Water samples:
The water sample (1) needs an immediate proposal to go to the next step. Sample (3) and (4) represent multiple new manufacturing plants in both Taiwan and China.
Soil samples:
(1) Soil sample (1) represents a two-million cubic meters hydrocarbon contaminated soil jobsite. (2) Soil sample (2) represents a special niche market.
Tank bottom sludge:
Regular needs for tank cleaning. A two-tank cleaning job is ongoing since last week in Taiwan. (Very time-consuming job without LC.)
Visit Battery Company Arrived Taipei city No samples tested
Two waste samples are tested
One (1) oil tank sludge is tested and discuss the Middle East drilling cuttings treatment project opportunity.
Water samples:
LC does great job for removing oil in both samples.
Tank bottom sludge:
LC does a great job.
Oil based drilling cuttings:
No samples for test. Taiwan Wolmo company has good opportunity in Middle East.
Water samples:
provides very good membranes for extreme-condition applications. LC can solve their oil removing problems.
Tank bottom sludge:
company sells equipment worldwide for handling tank bottom sludge. They look forward to working with LC technology for better treatment results.
Oil based drilling cuttings:
company has opportunity in to treat oil based drilling cuttings.

Table 2. Test results in China

In China. (December 13th – December 19th)

Test ten (10) samples
Six (6) oil based drilling cuttings (OBDC) samples: including fresh cuttings, fresh muds, and aged cuttings from different jobsites.
Two (2) water samples: one production water and one preliminary pre-treated fracking flowback water.
Two (2) aged dessert samples: aged hydrocarbon contaminated bentonite clay from drilling area in dessert.
-------------------------------- _
Meet with for discussion about heavy oil treatment opportunities.
Oil based drilling cuttings samples:
LC does great jobs for all samples.
Water samples:
LC successfully removing oil in the samples.
Hydrocarbon contaminated bentonite samples: LC does a great job. ---------------------
Oil based drilling cuttings samples:
EPA officers sit in the meeting. Need some safety document of LC. Need a pilot unit to run in a real drilling jobsite.
– mountainous area Take five (5) oil based drilling cuttings samples from an operating jobsit Oil based drilling cuttings samples:
LC does great jobs for all samples.

For discussion


Tests done regarding pipeline movement and cleaning

COSIA in Canada COSIA in Canada

Approved LC℠ and initiated Husky and Imperial Oil to do additional testing and pilot in Canada for oil sands

Testing can be discussed and reviewed upon NDA.


LC ℠ can be used for reovery of hydrocarbons from oil sands and down hole, cleaning oil spills on land and water, tank, railcar or barge cleaning, pipeline cleaning or movement, drill cuttings, production water or tailing ponds cleaning, oil - water seperation, stops emulsions and shingle recycling .
The LC ℠ is recaptured for reuse, the oil is salvaged for processing, is NOT energy intensive, produces no pollution or waste of valuable water, mediums are cleaned to ppm ready for reclamation, re-use or disposal, salvages oil.
LC ℠ not only recovers oil from down hole or oil sands, it seperates and salvages the oil from various mediums and leaves the medium cleaned to ppm for immediate reclamation or re-use.
LC ℠ creates no pollutions or waste of water and is re-used. It has a lower OPEX and CAPEX. LC ℠ is environmentally friendly.